Enormous quantities of microplastics are released into mineral water by the caps, which wear down as plastic bottles are opened and closed. This has been demonstrated by a study from the University of Milan.
Plastic bottles are among the most widespread forms of waste and may represent more than just an environmental problem. Their use could also put our health at risk when we drink the water or beverages they contain. Several studies have already raised the alarm on this issue, demonstrating the presence of microplasticsin water contained in plastic bottles. Now, a new piece of research, entitled "Does mechanical stress cause microplastic release from plastic water bottles?" and published in the scientific journal Water Research, has identified one of the sources of contamination. Researchers from the Department of Environmental Science and Policy at the University of Milan, by analysing the effect of the stresses that bottles undergo in relation to the release of microplastics, have discovered that these are released above all when we screw and unscrew bottle caps.
The scientists analysed half-litre mineral water bottles made from PET (polyethylene terephthalate), from three different brands and of varying thickness (light, medium and heavy), after subjecting them to the stresses they might encounter during normal use. The researchers first examined the effects on the water of opening and closing the cap once, 10 times and 100 times; then those of crushing the bottles under a 5 kg weight for 1 and for 10 minutes.
The study's results first of all confirmed the presence of microplastics in the water, albeit in quantities not alarming for health (an average of around 150 microparticles per litre). The tests then showed, however, that microplastics in the water did not increase significantly following crushing, regardless of the PET thickness. This could mean that PET itself does not introduce microplastics into the water, and that the source of contamination might instead date back to, for example, the bottling stage.
The same, however, cannot be said of the caps. Made from HDPE (high-density polyethylene), they respond poorly to stress: as the study demonstrated, caps that are unscrewed and screwed back on multiple times, as they wear down, release thousands of plastic microparticles that settle on the rim of the bottle and on the cap itself, and which we easily come into contact with when we drink. In the analyses, this occurred in particular for one of the brands examined, probably due to the structural characteristics of the thread on the bottle neck.
The cap is therefore the bottle's weak point: "Reusing plastic bottles, which is desirable from an ecological standpoint, inevitably leads to a greater release of particles, especially if prolonged," says Paolo Tremolada, lecturer in Ecology at the Department of Environmental Science and Policy. "Plastic bottles and water bottles should feature a low-microplastic-release closure system, such as a press-fit mechanism, as opposed to the screw-top systems found on ordinary plastic bottles. Based on current knowledge, there does not appear to be a health risk, although the debate over the possible risks associated with the ingestion of microplastics is still open."
Microplastics in mineral water come from the caps
Food — di Carlotta Garancini
Enormous quantities of microplastics are released into mineral water by the caps, which wear down as plastic bottles are opened and closed. This has been demonstrated by a study from the University of Milan.