Tests of the first plug-in hybrid buses with inductive charging get under way in Scandinavia. Thanks to Scania, it is possible to travel in electric mode while regenerating battery energy during stops, without interrupting the service.
Cutting emissions from public transport is one of the crucial challenges of sustainable mobility. The main solutions adopted so far involve the use of biofuels or electric propulsion, yet the optimal horizon has not yet been reached. In the first case, while a reduction in carbon dioxide pollution of around 40 per cent compared to the standard is achieved, the zero-emissions target remains a distant prospect; in the second, the ecological objective is fully met, albeit at the expense of operability, since vehicles rarely exceed a range of 200 kilometres and recharging takes on average between five and seven hours. From Scandinavia, however, comes a particularly interesting "recipe" that combines plug-in hybrid technology with wireless charging.
The new Scania hybrid bus in action in Sweden. Note the plate, embedded in the asphalt, for inductive charging
The plug-in hybrid bus can travel with zero emissions
The bus of the future is called the Scania Citywide LE 4x2 and features plug-in hybrid propulsion. This means it is equipped with a powertrain combining two motors — the first an internal combustion engine, the second battery-powered — capable of covering several tens of kilometres in purely electric mode. That is, without the biodiesel-fuelled engine being switched on and avoiding the emission of any pollutant whatsoever. This advantage is made possible by the adoption of more powerful batteries compared to "simple" hybrid models, which can moreover be recharged not only during deceleration and engine off-load phases, but also via the electricity grid. This last aspect constitutes the second advantage of the Scandinavian vehicle, given that charging does not require connection to a conventional charging post, but instead takes place inductively in wireless mode (without cables).
The inductive charging plate for the bus, virtually invisible so as not to alter the urban landscape
Seven minutes at a stop for ten kilometres of range
Wireless technology is based essentially on the pairing of an inductor (housed in a pad placed on the ground, or beneath the asphalt) and a receiver on board the bus: the system exploits the resonance created by variations in the intensity of the magnetic field, transferring energy in a similar way to portable devices, smartphones above all. An ingenious solution that involves the presence of special plates at bus stops, so as to regenerate the batteries during service. A seven-minute stop yields ten kilometres of range in purely electric mode. Given the frequency of stops, the Scania bus travels for the majority of the time with zero emissions, aided by the 130 kW electric motor powered by the 56 kWh lithium-ion batteries. And should that not be sufficient, the internal combustion engine is always ready to cut in.
A moment of wireless charging during a stop
The Scania bus is already in service in Sweden
Testing of the new Scania bus has got under way in Scandinavia, more precisely in Sweden, in Södertälje. An extreme testing ground, characterised by harsh climatic conditions, necessary for refining plug-in hybrid inductive-charging technology. A technology that forms part of a broader research project aimed at creating a quiet and sustainable public transport system. The study, partly funded by the Swedish Energy Agency, involves as its main actors Scania — a specialist in the manufacture of trucks, road tractors, buses and engines — the public transport operator for the Stockholm region SL (Storstockholms Lokaltrafik), energy supplier Vattenfall, the municipality of Södertälje and the Royal Institute of Technology (KTH).
No range anxiety for the plug-in hybrid bus
The Scania Citywide LE4x2 bus brings with it all the environmental benefits of electric propulsion, but without the issues associated with range and charging: on the one hand, it is always possible to call on the conventional engine; on the other, the batteries are less capacious than those of a purely battery-powered model and therefore require a shorter recharging time. Recharging that, moreover, can be carried out inductively and without any interruption to service. A new frontier, as highlighted by Hedvig Paradis, project manager at Scania: "Our hybrid bus represents a landmark step forward for sustainability, since wireless charging is silent and at the same time invisible. The field tests that have begun in Södertälje are designed to encourage both society and the automotive industry to turn the page, cutting emissions and reducing traffic noise in urban areas. The future is now!".
The bus of the future is hybrid and recharges wirelessly
Mobility — di Sebastiano Salvetti
Tests of the first plug-in hybrid buses with inductive charging get under way in Scandinavia. Thanks to Scania, it is possible to travel in electric mode while regenerating battery energy during stops, without interrupting the service.